Iron

The main component is iron, using powder metallurgy process, compare to the bronze manufacturing, the process is easier.

• High friction coefficient.
• Good wear resistance
• Long life
  

Parameter	Wet Application
Dynamic Coefficient (μd)	>= 0.35
Static Coefficient (μs)	>= 0.45
Wear Rate (λ)	<= 2.0x10-8cm3/J
Conditions of Application	1. Specific Pressure: <= 6MPa 2. Linear Velocity: <= 80m/s

Ceramic

Ceramic materials are best known for their use as clutch 'buttons'. Our ceramic friction materials act as insulators, driving heat away from the friction material surface. They are fitted to clutches used in agricultural tractors, heavy duty truck and performance automotive.

• High durability
• Good wear resistance
• Long life

Parameter	Wet Application
Dynamic Coefficient (μd)	>= 0.35
Static Coefficient (μs)	>= 0.45
Wear Rate (λ)	<= 2.0x10-8cm3/J
Conditions of Application	1. Specific Pressure: <= 4MPa 2. Linear Velocity: <= 30m/s

Molybdenum

Molybdenum (Mo) friction materials are typically used for low speed high pressure applications.

• Good oil compatibility
• Good wear resistance
• Stable friction Coefficient

Parameter	Wet Application
Dynamic Coefficient (μd)	0.08 - 0.10
Static Coefficient (μs)	> 0.1
Wear Rate (λ)	<= 2.0x10-8cm3/J
Conditions of Application	1. Specific Pressure: <= 9MPa 2. Linear Velocity: <= 40m/s